skip to main |
skip to sidebar
This the DC motor controls circuit with a signal MCU. By can control DC Motor 24V can fine the speed of motor with pulse and timer (MCU). This circuit composes transistor and power mosfet (MBR1045). Then motor driver has been verying and still have the circuit changes the direction of motor Reverse Rotation get Relay 24V 20A get back to electricity pole has with. The detail is other , see in the circuit. Source: aircraftdesigner
Describe:
This circuit uses a 555 timer as the bases of the touch switch. You can learn more about 555 timers in the Learning section on my site. When the plate is touched the 555 timer is triggered and the output on pin 3 goes high turning on the LED and the buzzer for a certain period of time. The time that the LED and the buzzer is on is based on the values of the capacitor and resistor connected to pin 6 & 7. The 10M resistor on pin 2 causes the the circuit to be very sensitive to the touch. 
This the DC motor controls circuit with a signal MCU. By can control DC Motor 24V can fine the speed of motor with pulse and timer (MCU). This circuit composes transistor and power mosfet (MBR1045). Then motor driver has been verying and still have the circuit changes the direction of motor Reverse Rotation get Relay 24V 20A get back to electricity pole has with. The detail is other , see in the circuit. 
